The major part of the documentation of the CD-ROM is available under html and/or
pdf form, and can be displayed from buttons of the assistant. The goal of this section
is to verify that these buttons are working correctly.
3.3.1
Click on the button Aide générale of the 
toolbar : this should launch the display of the general documentation of the Rosetta
CD-ROM in your default web browser (cf. Fig. 2.1).
If no display appears, maybe no web browser is installed (for ex. if you are under
grass-roots Windows 95), or maybe your browser is not coupled to the files with
extension htm. In the first case, you can use Netscape from the CD-ROM. To this
end, click on the button Netscape of the
toolbar, do the configuration of Netscape as indicated in the sec. 4.11.1, then declare
it as the default web browser when the question is asked to you. In the second case,
couple the files with extension htm to your web browser by using the usual procedure
of Windows.
3.3.2
- Close the web browser opened during the previous test, then click on the
button Man Util Ros écr. of the toolbar.
This opens the table of navigation of the User's manual of the Rosetta
CD-ROM for Windows (the present manual), in the window of Navigator
AsTeX.
If the window of navigation is not displayed, try to install the required libraries,
as indicated in section 10.3.
- Open the pull-down list at the top and on the right of the navigator's window,
click then on the element Gsview of the list.
| Figure 3.2 | Selection of GSview to display a manual from its table of
navigation. |
|
This displays the manual in Gsview (cf. Fig. 3.3).
- In the window of navigation, click on the blue ball before the element table of
contents, then on the blue ball before the element 3 installation Tests.
This displays the sections of chapter 3 in the window of navigation
(Fig. 3.3).
- Double click on the element 3.1 Test d'installation de l'assistant Rosetta.
The section of the manual corresponding to this element should be displayed in
the window of Gsview (Fig. 3.3).
| Figure 3.3 | Display of the pdf version of the user's manual of Rosetta
CD-ROM with the help of Navigator AsTeX and Gsview. |
|
- Close the window of Gsview.
You can, if you wish, redo the same test while selecting Acrobat Reader instead of
Gsview in the navigator's pull down list (cf. however the limitations indicated in the
sec. 10.7). If the AsTeX distribution is installed, you can also do the test with Dviwin
and Dview. The display with Dviwin works for all versions of Windows, but it is only
in N&B. The display with Dview is in color, but it only works with Win 9x
(cf. Installation manual of AsTeX).
3.3.3
- Close the windows of the previous test that would still be
opened (navigator AsTeX and, possibly, Acrobat Reader, Dviwin or
Dview), then click on the button Man Util Ros A4 of
the toolbar. This opens the table of
navigation of the User's manual of the Rosetta CD-ROM for Windows
(the present manual), in a form adapted to printing.
- Display the manual with Gsview by proceeding as in the previous section.
- In the window of Gsview, click on the option Fichier / Imprimer and select
the element mswinpr2 in the list Type (normally, the installation program of
Rosetta made it for you, but who knows!).
- Determine, by examining the table of navigation, the pages that you want to
print (for ex. pages 23 to 32, if you want to print the installation chapter).
Then select these pages in the frame Pages: of the printing dialog box
Configuration of the printer of Gsview. If your printer has an option
recto/verso, click on Ok to launch the printing. Otherwise, click on Impaires
then Ok to print all odd pages, put back the printed sheets in the printer. Tick
the slot Ordre inverse if the odd sheets have been printed in the order of
decreasing pages, untick it otherwise, and click on Paires then Ok to print the
even pages.
- Close the windows of navigator AsTeX and Gsview.
