Debian GNU/Linux on Medion MD95345 (aka MIM 2090)
Reference : Medion MIM 2090 / MD 95345
- Chipset : Intel i800 GME
- Processor : Celeron 1.6 Ghz
- Memory : 1024 Mo DDRAM II
- Video XGA 15'' 1024x768
- Hard disk : Seagate ST9100823A
100Go , speed 5400
- Ethernet adapter Realtek RTL-8169
- Sound card 82801FB/FBM/FR/FW/FRW AC97 compliant
- Integrated 56k modem AC'97 Modem
- 3 USB 2.0 EHCI/UHCI ports
- 1 IEEE 1394 FireWire OCHI port
- 1 PCMCIA Texas Instruments
- Graphics Intel i915
- CDR-RW DVD burner PIONEER DVR-K14L
- Intel PRO/Wireless 2200BG Network Connection
The package also include a PCMCIA DVB-T tuner denoted by
Philips Semiconductors SAA7134 . Not tested yet nor read any success
but there is some hope:
See also http://linux.bytesex.org/v4l2/saa7134.html
This page relates my experience in installing Linux on this computer.
I have already installed Linux on several computers, including laptops,
but I must confess this one was a hard one, due to a recent hardware
and perhaps to a buggy BIOS.
I have bought this computer on July 2005 for about 1160 € , this
seems to bee a
low price for such a config.
At this time, i did not get the best from the graphics chipset, but it
is sufficient for my work and watching DVD's and DivX's.
Step 1: Install
- Boot with a weekly build iso , erase Windows, install a 2.4
kernel and reboot
Step 2: Install a recent kernel
- edit /etc/apt/sources.list to point to sid
- be sure the ethernet network works
- install kernel-image-2.6.11-1-686 ,kernel-headers-2.6.11-1-686
(or rather kernel-source-2.6.11-1-686:
it will be usefull later), gcc,
- be sure that the symlink /usr/bin/gcc points to gcc-3.3 and not to
- edit /boot/menu.lst and replace root=/dev/hda1 by root=/dev/sda1 for
the 2.6.11 kernel
- reboot with 2.6.11
Be carefull: there seems to be a bug in grub package; each time
you install a new kernell, he replaces /dev/sda* by /dev/hda* in the
first section of /boot/grub/menu.lst, so you have to edit it
Step 3: Wireless
- install package ipw2200-source and wireless-tools, compile modules
"module-assistant a-i ipw2200"
- Download the fimware 0.19 http://ipw2200.sourceforge.net/firmware.php and copy
the files to /usr/lib/hotplug/firmware .
- activate the wifi card by typing Fn-F1
- modprobe ipw2200 and you are in !
- configure the wifi
At next reboot, hotplug with automatically load ipw2200
Step 4: enable the dvd (!)
At this time, the dvd is not seen by the kernel, because the PC as a
Intel 82801FBM (ICH6M) SATA Controller, and the support of SATA
under Linux is not yet perfect.
First solution : add the following lines to
and regenerate the initrd by mkinitrd -o /boot/initrd.img-2.6.11-1-686 .
(Make a copy of the initial file, just in case)
At reboot, you have your hard disk at /dev/hdd , but DMA can not be
because the drived is managed by the generic IDE driver which does know
nothing about DMA.
Second solution : (taken from http://irbs.sourceforge.net/toshiba-a80-laptop-debian-howto-en.html
Change in file
ATA_ENABLE_ATAPI /*define to enable ATAPI support*/
ATA_ENABLE_PATA /*define to enable ATAPI support in ..*/
Put IDE GENERIC option to N
Go into kernel dir
and compile and make a package
–revision 01 –initrd kernel_image
the generated package
You can also download my .config
At next reboot, the wireless eth1 may become eth2 in case the module
for network under firewire 1394 is loaded. The DVD drive is attached to
Step 5: Into the hell of X !
Install the xorg packages from debian.
The correct driver is i810.
If you then startx with a reasonable configuration, it is possible
that you get a black
screen.I finaly found that this occurs when I attempt do load DRI.
At first,I took a 2.6.11 kernel + the last snapshot from http://dri.freedesktop.org/snapshots/
Expand , cd to dripkg , type ./install and it will compile and install
all the stuff.
Whatever you do, the DRI driver does not load because of a version
Now, I simply use a 2.6.12 kernel and take care not load DRI.
You can find here my xorg.conf file .
Works with slmodem and proprietary driver slamr.
apt-get install sl-modem-daemon sl-modem-source
Untar the source file, enter in the kernel source directory
make-kpkg modules_image builds
just have to do dpkg -i
I added to /etc/modules
slamr # perhaps not necessary
and to /etc/hotplug/blacklist
(This is to prevent the Alsa driver from trying to manage the modem.)
I added SLMODEMD_DEVICE=slamr0 to /etc/default/sl-modem-daemon
(perhaps not necessary)
and got the following /etc/wvdial.conf from http://apocalyptech.com/linux/nc6120/
Modem = /dev/ttySL0
Baud = 57600
Init1 = ATZ
Init2 = ATQ0 V1 E1 M1 S0=0 &C1 &D2 +FCLASS=0
Init3 = AT+MS=34
ISDN = 0
Modem Type = Analog Modem
Phone = xxx-xxxx
Username = xxxx
Password = xxxx
Carrier Check = no
The Bios comes from Insyde Software
System Bios: 1.00A
EC Bios : 1.01
There is a more recent version of the Bios (1.02) on the homepage of
but I did not succed in flashing the BIOS under freedos or DOS6, always
getting an error.
If you try such a risky experience, this page may help:
Some Linux users reported that the Pioneer dvd burner is buggy
and the discussion
here is the patch for growisofs growisofs.patch
I generated a debian package that you can find here .
Find here the output of lspci -vv .
Questions or suggestions are welcome !
My email: Olivier dot Garet at univ-orleans dot fr
Last modification: 04 august 2005